1/2" pitch roller chain assembly. This chain is compatible with the sprockets advertised elsewhere on our website. Lotsa grease included at no extra cost. This is ANSI standard riveted roller chain 1/...

This solenlid draws 1 amp at 12VDC continuous duty. Measures approximately 1" X 1" X 2". Ideal for robotics applications. The is our 04N019 without a spring. (28B012)

TIMER - 15min Motor Drive 115V Panel mount 3/8” with 1/4” shaft

These are designed to lock onto a 3/16" shaft with setscrews. They are a triple section universal joint (yes it's a joint; no you can't smoke it) for twisting shafts around corners. Each unit is about...

THOMPSON ROD 28 INCH

This Hi-Max 1/2" pitch roller chain is 1/2" wide and has a masterlink. These high quality assemblies come complete with grease and are compatible with roller chain and sprockets featured elsewhere on ...

This idler is designed to work with 1/2" pitch, 1/2" wide roller chain. It is about 5.5" in diameter and has a ball bearing pressed into the center that will fit onto a 1/2" diameter shaft.

Set of 4. Single Wheel all metal with swivel mount.

These would be cool for a robotics application where a mobile piece had to be powered/controlled via a cable, or it could be used in a power/control application in a machine tool. There is a heavy neo...

Airpax 12V stepper p/n C82750-M2 features 36 Ohm coils. This 4 wire stepper has a 1/4" dia. keyed shaft that is about 1/2" long. The body of the motor is about 2.25" dia and 1" thick.