1/2" pitch roller chain assembly. This chain is compatible with the sprockets advertised elsewhere on our website. Lotsa grease included at no extra cost. This is ANSI standard riveted roller chain 1/...

This Hi-Max 1/2" pitch roller chain is 1/2" wide and has a masterlink. These high quality assemblies come complete with grease and are compatible with roller chain and sprockets featured elsewhere on ...

This idler is designed to work with 1/2" pitch, 1/2" wide roller chain. It is about 5.5" in diameter and has a ball bearing pressed into the center that will fit onto a 1/2" diameter shaft.

55 tooth, metal gearApproximate measurments: Outside diameter (tip of tooth to tip of tooth) = 5/16"Insert's shaft diameter = 1& 1/2", with one 3/16" by 3/8" keyShaft diameter of the gear if the i...

Alling-Lander Regal Beloit Right Angle Speed Reducer/Gear Reducer Index Drive Model 2192-U-1-110 .39 Input HP, ratio 66:1

Hi-Max type SBR roller chain in factory cartons. These are side roller chains p/n 35D1 E8LP+(1)SAO, each chain is about ten (10) feet long. These are ANSI standard roller chains and are compatible wit...

17-Tooth Sprocket. This is a Kaman #1338 sprocket for chain drive applications. See related products elsewhere on our website. The sprocket is about 2" in diameter and 3/16" wide, the hub is for a 1/2...

These 48 tooth chain drive sprockets were made by Martin Sprocket and Gear, they bear their part number 35B48NI. They are 6" dia and have a keyed hole for a 3/4" shaft, a setscrew is provided to keep ...

NSK (Japan) ball bearing p/n 6301ZZC3 (not part of the ball bearing mousetraps featured elsewhere on this website).

3-7/8" diameter OD x 3-3/16" ID x 3.16" wide