TITE-FIT BOX CHASSIS
An orthodox box that has many uses and is engineered
to deserve its name of Tite-Fit. Screw fastening.
All screw fasteners are punched and tapped.
Self tapping screws are not used.
Available in Plain Aluminum.
 
  

Model #	Width	Depth	Height	Price
TF770	2-3/4	2-1/8	1-5/8	$3.74
TF771	2-3/4	2-1/8	2-3/4	$4.22
TF772	3-1/4	2-1/8	1-1/8	$ 3.74
TF773	3-1/2	2-1/8	1-5/8	$ 4.03
TF774	4	2-1/8	1-5/8	$ 4.22
TF775	4	2-1/4	2-1/4	$ 5.08
TF776	4	2	2-3/4	$ 5.09
TF777	4-1/4	2-1/4	1-1/2	$ 4.22
TF778	5	2-1/4	2-1/4	$ 5.46
TF779	5	4	3	$7.61
TF780	5-1/4	3	2-1/8	$6.02
TF781	6	5	4	$10.65
TF782	7	5	3	$10.78
TF783	8	6	3-1/2	$13.11
TF784	10	6	3-1/2	$15.51
TF785	10	2	1-5/8	$6.88
TF786	12	2-1/2	2-1/4	$9.54
TF787	12	7	4	$21.55
TF788	17	5	4	$23.66

PANEL MOUNT SHELF ASSEMBLY
For 19" Open Racks. Constructed with .063 aluminum. Fits all standard 19" racks. Ideal for mounting equipment not attached to a rack mount.
Shelf is flanged for maximum support and is reversible. Panel shelf area is 17" x 14". Complete with hardware. Plain aluminum finish. 

Model	Description	Price
PMS19	Shelf Only	$20.51
PMS19-350	Complete Assy. - 3½"H	$38.83
PMS19-525	Complete Assy. - 5¼"H	$40.74

19" RACK PANELS

Notching is Western Electric. Standard for Relay Rack Panels. All panels are 19" wide. Unpainted aluminum. 

Model	Height	Price
175	1-3/4"	$ 6.74
350	3-1/2"	$11.85
525	5-1/4"	$17.14
7	7"	$22.25
875	8-3/4"	$27.84
1050	10-1/2"	$33.13
1225	12-1/4"	$38.46
14	14-3/4"	$43.91
1750	17-1/2"	$54.46
1925	19-1/4"	$59.88
21	21"	$65.16
2425	24-1/4"	$76.75
2625	26-1/4"	$81.17

DIE CAST ENCLOSURES
• Close-fitted flange lids fasten to bosses in the body with counter sunk screws.

• Aluminum alloy (380) offers excellent screening properties.

• Easily machined, these enclosures are useful as instrument and meter cases, filtered networks, junction boxes, switching boxes, or anything requiring a small enclosure.

• Enclosures are dust and moisture resistant.

• KAB3321 and KAB3421 are 1/16" thick.

• KAB3432 and KAB3742 are 3/32" thick. 

Order #	Dimensions (in.)			Price
KAB3321	1.06	1.50	3.63	$ 6.87
KAB3421	1.06	2.38	4.38	$7.77
KAB3432	2.06	3.69	4.69	$12.42
KAB3742	2.06	4.70	7.39	$19.75
KAB3743	3.06	4.70	7.39	$21.30

 
 
 
 

SNAP LATCH SERIES BOXES

INTERLOCKING SERIES
A box chassis for every use.

• Interlocking construction
• Engineered to eliminate hard to get at places.
• Maximum panel area exposed for component mounting.
• Easily fabricated into amplifiers, junction boxes, oscillators, etc.

• The rugged sturdiness of the final assembly will amaze you.

• Simple and speedy to assemble, with only two screws to put in place.
All screw fastenings are punched and tapped. (Two screws included).

• Available in plain aluminum. 

Model #	D"	W"	H"	Price
M00	2-1/4	1-1/2	1-3/8	$3.45
00Z	2-5/16	2-1/8	1-3/4	$3.84
000	3-1/4	2-1/8	1-5/8	$5.21
00	4	2-1/8	1-5/8	$5.41
100	2-3/4	2-1/8	2-5/8	$5.46
101	4-1/4	2-1/4	1-1/4	$5.41
102	4	2	2-3/4	$7.18
103	2-3/4	2-1/8	2-1/8	$5.76
107	4	2-1/4	2-1/4	$6.63
108	5	2-1/4	2-1/4	$7.57
135	3-3/4	3	2-1/8	$7.58
136	5-1/4	3	2-1/8	$8.75
137	8	3	2-3/4	$12.72
138	6-1/4	3-1/2	2-1/8	$10.93
139	5-1/2	3	1-1/4	$8.10
141	6	4	3	$13.52
142	6	4	5	$16.41
143	4	4	2	$8.81
144	10	4	1-1/2	$16.94
145	7	5	3	$16.90
146	8	6	4-1/2	$23.83
15	12	2	1-3/4	$12.48
650	6-1/2	2-1/8	1-5/8	$8.02
850	8-1/2	3-1/2	2-1/8	$9.67

 
 

CROWN ROYAL SERIES

The beauty of the CROWN ROYAL (CR) Series reflects the present mode of electronic enclosures. The rectilinear outlines combine construction features to meet the demands of the most critical user. Constructed of 0.050 aluminum, 3003-H-14 and finished in light gray bottom with a light blue top. This is the answer to the housing problems of the most critical engineer, OEM or hobbyist who demands versatility and rugged construction combined with beauty to enhance the prestige of the contents. 

Model #	D"	W"	H"	Price
CR211	2-1/4	1-1/2	1-3/8	$5.61
CR221	2-1/4	2-1/8	1-3/4	6.14
CR234	2-3/4	2-1/8	2-1/8	6.86
CR275	2-3/4	2-1/8	2-5/8	7.57
CR321	3-1/4	2-1/8	1-5/8	7.30
CR332	3-3/4	3	2-1/8	9.28
CR345	3	4	5	12.37
CR400	4	2	2-3/4	8.92
CR421	4	2-1/8	1-5/8	7.50
CR422	4	2-1/4	2-1/4	8.73
CR425	4-1/4	2-1/4	1-1/4	7.47
CR442	4	4	2	10.15
CR522	5	2-1/4	2-1/4	9.13
CR531	5-1/2	3	1-1/4	9.80
CR532	5-1/4	3	2-1/8	10.19
CR621	6-1/2	2-1/8	1-5/8	9.85
CR632	6-1/4	3-1/2	2-1/8	12.46
CR643	6	4	3	15.17
CR645	6	4	5	17.78
CR753	7	5	3	18.52
CR800	8	3	2-3/4	15.13
CR852	8-1/2	2-1/8	1-5/8	12.85
CR864	8	6	4-1/2	24.71
CR1042	10	4	2-1/2	19.04
CR12217	12	2	1-3/4	14.48

 
 

RACK MOUNT CABINETS

These high-quality rack mount enclosures come in an attractive charcoal gray epoxy finish. The top, bottom and sides have ventilation holes to assist in cooling. The front and back panels are made of 0.059" thick aluminum for easy custom design. The top, bottom and sides are 0.035" steel. Choose from six sizes. All include handles except RC3120A. 

Model	Front Panel Size	Cabinet Size	Weight	Price
RC3120A	Front panel 19" x 1.6875"	1.5"H x 16.625"W x 9.625"D	7lbs	$42.95
RC3120B	Front panel 19" x 3.4375"	3.25"H x 16.625"W x 9.625"D	8lbs	$53.95
RC3120C	Front panel 19" x 3.4375"	3.25"H x 16.625"W x 13.1875"D	10lbs	$59.95
RC3120D	Front panel 19"x 5.1875"	5"H x 16.625"W x 13.1875"D	11lbs	$68.95
RC3120E	Front panel 19" x 5.1875"	5"H x 16.625"W x 16.75"D	12lbs	$78.95
RC3120H	Front panel 19" x 8.6875"	8.5"H x 16.625"W x 16.75"D	15lbs	$98.95

 

PLASTIC SPEEDY BOXES
ABS black plastic with slotted walls to accept PCBs. Screws included.
Will not crack or split when drilled or punched.
 

PB114A	PB114B	PB114C	PB114D

Model	Dimensions	Price
PB114A	1" x 3" x 2"	$2.19
PB114B	0.8" x 4.25" x 2.188"	$2.29
PB114C	1.563" x 3.875" x 2.938"	$2.89
PB114D	2.313" x 5.875" x 3.938"	$3.39

 

STEEL ENCLOSURE SERIES
Features: Ventilating holes. Self-adhesive feet and screws included. Front and rear panels: 0.05" (1.3mm) aluminum alodine (painted white). Top and bottom covers: 0.04"(0.9mm) phosphated steel (painted black). 

Model	Dimensions	Price
GC3119A	2.5"H x 8"W x 7"D	$14.00
GC3119G	3.5"H x 8"W x 7"D	15.00

 

MORE BOXES and CABINETS