AC Motors

Baldor 3/4hp Motor
Baldor p/n VL3507 single phase 3/4 hp 115VAC(8.2A)/220VAC(4.5A) 60 Hz, 1725 rpm
25M016 Unit Price : $99.50

Baldor 3 Phase 1/4 HP Motor
Baldor p/n KM3454 three phase 1/4 hp motor operates on 208 to 230 or 460 volts 1725 rpm , 1.25 A or less. these have been removed from unused equipment. They will work with our gearbox p/n 25Z042
25M010 Unit Price : $44.95

Phonograph Type Motor
These look like something out of a record player from the vacuum tube era but they could also have been fan motors or a high speed rotisserie for a gerbil. The label is marked GI 2900-40, further it is rated at 115VAC 0.30 Amp, impedance protected. Power is applied via 'stake-on' terminals.
The unit measures approx 2.75 x 3" and it sports a 1" x 1/8" shaft (approximately of course).
25M004 Unit Price : $4.95

GTR Induction Geared Motor
GTR model HLMN-18T induction geared motor with dual 5/8" dia output shafts. The gear ratio is 10:1, 135 rpm. mfd in Japan by Nissei.
25M006 Unit Price : $89.00

Motor with Fan Blade
These are motor/fan kits. Each is packed with a motor, fan blade, grommet and mounting hardware. The blade is a press-on type. Hosiden of Japan made these as their p/n HMR32, the motor chugs along on 12 Volts and will pull the fan OK but it really perked up at 24 Volts and sounds serious with that voltage applied.
04M005 Unit Price : $2.49

48VAC Open Frame Motor
1.8A, shaft is 3/4" x 7/8" long. Motor measures 3" x 3" x 3"
23M029 $5.95

Yaskawa AC Servo Motor
with encoder PN USAREM-03BE2KX New in box 3x3x6"
23M033 $129.00

AC Gearmotor with Brake
120VAC 50/60Hz @ 3Amps. Output 147rpm, solenoid activated brake releases on powerup. Approximately 3" square x 5" long. Output shaft is 1=3/4" X 1/4" diameter.
23M030 $19.95

Baldor VM3534 Motor
1/3HP three phase 208-230V 1.8A 60Hz 1725RPM New.
23M006 $49.95

Baldor VM3538 Motor
1/2HP 208-230/460V 2-1/2, 1A 1725RPM 3-phase, shaft is 5/8" diameter x 2.25" long. New.
23M011 $49.95

92m022.gif (6634 bytes) LASER MOTOR
Precision Hysteresis synchronous motor. 115VAC, 60 Hz, 3600 RPM.
Designed to drive the rotating mirror in a laser printer.
Size approx 2.75" x 1.125". Shaft 1.125" x 0.1875".
92M022 $7.95 each

95m001.gif (15894 bytes) GEAR MOTOR WITH MAGNETIC BRAKE
25RPM nom. Torque 11 inch pounds start, 13 inch pounds run. Shaded pole 115VAC induction @ 0.75A. Size 2.75" x 3" sq. with 5/16" x 13/16" shaft and 3/16" x 9/16" motor shaft. Compare at $35.00.
95M001 $26.00 each

Hurst Hysteresis Synchronous Reversible Motor
Hurst model CA reversible 115VAC, 5 Watt, 1200 rpm. These motors measure 2.5 in dia. x 2.13" long and require an external 0.5uF cap. See PDF file for details and wiring diagram.
04M008 Unit Price : $9.95

30-rpm Gearmotor 24VAC
Bowman Electrical Products model E gearmotor 30 rpm clockwise rotation. This looks like a typical clock motor, better made than average the 1/8" dia. shaft is 1/2" long. Outside measurements are about 2.5 x 1.5"
04M009 Unit Price : $4.95