AC Fans

AC Fans and Blowers

Click here for 12VDC Fans

230VAC Fan
4.75"
23F001 $8.95

Etri 4.75" thin 115VAC Fan
Etri model 98XH0182020 115 VAC fan pulls. These 4.75" x 1" five bladed fans are impedance protected.
25F025 Unit Price : $9.95

115VAC MUFFIN FAN
Size 4.875" square various manufacturers.
21F001 $7.95 each

115VAC Rotron Fan 4.75"
Comair Rotron 115 VAC fan p/n 028021, model MU2A1.
These like new pulls measure 4&3/4" x 1&1/2".
25F001 Unit Price : $9.95

115VAC 3-1/8" x 1-1/2" Fans.
These are pulls from various manufacturers such as Boxer, Torim, Sprite,
Pamotor, Etri, Toyo Rotron and Muffin. Dealers choice.
20F006 $9.95

115VAC 4-3/4" x 1-1/2" Fans.
These are pulls from various manufacturers such as Boxer, Torim, Sprite,
Pamotor, Etri, Toyo Rotron and Muffin. Dealers choice.
20F009 $7.95

Open Frame Fan
Gould Type JB-3F
115VAC mounting holes 2-7/8" center to center. (Same as 3-1/8" Tubeaxial fan)/
20F012 $4.95

115VAC FAN
Open Frame Fan squirrel cage type. Fan diameter 3" mounting holes are 3-3/8"
22F002 $7.95 each

10" Rotron Exhaust Fan 115VAC
These Comair Rotron model GLE2LX fans have been pulled from service and are in good functional condition. They are round, 10" in diameter and 3&5/8" deep, each has eight mounting holes around it's perimeter and operate on 115VAC at 1/2 amp. Used.
The style is called Caravel we usually see these on the top of large equipment cabinets and also as exhaust fans in henhouses where if they don't have a protective grillwork they are often clogged with feathers. They have three notched blades for quieter operation and will move about 500cfm.
04F011 $24.95

Large Centrifugal Blower
These 115V AC single-phase, 5A blowers are in good used condition. The starting cap is included. They are fully enclosed and the appropriate shrouds and grillwork are included. These would be nice in a blacksmith's forge or to exhaust a room full of vacuum tube audio or ham gear.
Mfr: McClean Engineering PR473B.
Dim: 20" x 20" x 8"
Wt: 40 lbs
23F010 $49.95

Squirrel Cage Blower
Mfd by Mclean Engineering P/N 220313-001
This 7" diameter x 4-1/2" wide blowers assembly operates on 230VAC @ 0.9A
20F020 $24.95

Elena MDL F8025L-230H
230VAC Fan 50/60Hz Impedance protected. Measures 3-1/8" x 1"
20F005 $9.95

230VAC 3-1/8" x 1-1/2" Fans.
These are pulls from various manufacturers such as Boxer, Torin, Sprite, Pamotor, ETri, Toyo Rotron, and Muffin. Dealers choice.
20F007 $9.95

220VAC 4-3/4" x 1-1/2" Fans.
These are pulls from various manufacturers such as Boxer, Torim, Sprite,
Pamotor, Etri, Toyo Rotron and Muffin. Dealers choice.
20F008 $9.95

230VAC FAN
3-3/4" (92mm) square X 1" (25mm) deep. Sunon SF23092A/2092HSL 50/50Hz.
22F001 $7.95 each

Big Fan
13" Diameter. x 7 3/4" High 14 /14 " x 2" Front Bezel (Intake Side) 200VAC 3-phase 50/60Hz 3600 RPM Has sensor (Transistor to Ground) ON when rotating. Fuji Electric VA5 325Fs-42C.
21F005 $39.95

92f014.jpg (7479 bytes) DUAL 5" BLOWER
Back in stock! 240 VAC, 60Hz. Mounting plate measures 10" x 14". Originally cost over $300!
Vanguard Model VD42A52-1
92F014 Our Price $79.95

Rotron 10" 220VAC fan
Rotron model HF/KS803R.S.1490P950/60Hz, 220/230V, .6/.7A single phase, wants a 2.5uF, 440V starting cap (not included).
25F002 Unit Price : $24.95

Sanyo Petit Ace Fan 230VAC
Sanyo model 109S054 Petit Ace 25 fan, 230VAC 7 Watt. These fans measure 80x80x25mm, feature aluminum frame
and a seven bladed shutter. Used.
04F015 Unit Price : $9.95

Etri 115VAC Fan 4.75" square
Etri high quality fan pulls; sturdy metal frame measures standard size 4.75" x x1.5", five blades for quiet operation, impedance protected, ball bearing etc. ETRI model number 129 xr 182,, 115VAC, 15Watts.
25F008 Unit Price : $7.95

115VAC Muffin Fan 4.75"
Muffin model MU2A1 pulls 115VAC, 14 Watts. These three bladed fans measure 4.75" x 1.5" and are built into a plastic frame. These Rotron fans are so popular that finding one is like meeting an old friend.
25F011 Unit Price : $7.95

IMC Boxer Fans 115VAC 4.75"
Used IMC boxer fans TBS series run on 115VAC, measure 4&3/4" square and 1&1/2" deep.
25F012 Unit Price : $4.95

Tobishi 208VAC Fan 4.75" x 1.5"
These are heavy duty 208 Volts ac fans the 5 bladed impeller is metal as well as the housing, it is a copy of a Papst fan and was mfd by Tobishi under license from Papst. The model number number is UTMA2-U4556 it draws 16 Watts.
04F018 Unit Price : $12.95