"Test Equipment Blowout!"
Everything must go to make room for 800 new pieces coming in.
No reasonable offer refused on anything on the current list.
Everything will be sold on an 'as is where is' basis, shipping additional.
Dealers invited; we can ship by the pallet fob Morgan Hill.
Make offers early before the good stuff is gone.
 

Fluke | Hewlett Packard | Tektronix | Other Makes

Enter the Make and Model numbers in the Description: field, the Price in the Price: field and the Quantity desired in the Qty: field and press the Add To Cart button. Repeat for each additional item you want.

Thornton 200CR Measurement System
Thornton model 200CR, p/n 6220-1 two channel conductivity/resistivity measurement system. New in factory carton with manual and foam.
25Z088 Unit Price : $489.00

F W Bell Current Sensor
F. W. Bell model CLN-200 current sensor made in the UK (but not by Lucas; therefore these are reliable). These closed loop current sensors operate from DC to 150KHz, output is 100mA.
CLN-200 Unit Price : $59.95

HPIB/GPIB Cables
HPIB-½(half-meter)
HPIB-1(1 meter)
HPIB-2 (2 meter)
HPIB-4(4 meter).
Longer cables  available; call for stock check. DATA SHEET

Your choice only $19.95 each while they last.

Advanced Digital Multimeter
3 1/2 Advanced Digital Multimeter with Temperature and Frequency measurement
3 1/2 digit LCD (1.0" digit height),
AC Voltage: 200mV ~ 700V, DC Voltage: 200mV ~ 1000V, Resistance: 200 ~ 200MOhms, Capacitance: 2nF ~ 200uF, Frequency: Up to 20KHz, Temperature: -20C ~ 1000C, Diode, transistor, and continuity testing, Includes manual, testing probe, temperature probe, yellow rubber base, Two 9Volt batteries included: one battery is installed and one spare. Maximum display: 1999. LCD display size: 43mm x 68mm. Size: 4.0"W X 2.0"D X 8.0"H, Weight: 1.6lbs
20Z002 $49.95 each

Basic Pocket Digital Multimeter 
3 1/2 digit LCD (0.5" digit height),
AC Voltage: 200V ~ 750V, DC Voltage: 200mV ~ 1000V, Resistance: 200 ~ 2MOhms, DC Current: 200uA/2mA/20mA/200mA/10A, Diode, transistor hfe testing, manual, test lead, and 9Volt battery included. Size: 2.6"W X 1.0"D X 4.8"H, Weight: 0.5lbs
20Z012 $9.95

Clamp Meter 
LCD size: 1547mm
AC Voltage: 200/600V, DC Voltage: 2/20/200/1000V, Resistance: 200 ~ 2MOhms, AC Current: 200/600/1000Amp
Frequency: 2KHz, Diode, continuity testing, Data Hold, manual, test lead, and 9Volt battery included
Size: 70X230X37mm, Weight: 310g 11ozs
AC2891 $69.95

Advanced Clamp Meter
Display: Digital and Analog display, 3200 counts and 33 segments bar graph. Digits are 15mm high
AC Voltage: 750V, DC Voltage: 1000V, Resistance: 30MOhms, AC Current: 1000Amp, DC current: 600Amp, Max. Diameter for Conductor: 50mm
Frequency: 30KHz, Diode, continuity testing, Data Hold, Auto Range, Back Light, manual, test lead, and 9Volt battery included
Size: 282X2104X47mm, Weight: 500g 1.2lbs

AC2892 $109.00

100 MHz SCOPE PROBE
Attenuation: X1 @ 10 MHz, 75pF, X10 @ 100 MHz, 11pF. Working voltage: 600VDC (including AC peak). Compensation range: 15-50 pF. Include 6" ground lead, spring hook, BNC adapter, I.C. tip, insulating tip, and trimmer tool. American-made.
94Z002 $24.50 each

IC Clips Test
Leadset two 2.25” IC clips on 3 foot wires 1 red, 1 black  wt. 0.08
23Z070 $3.49

Qty:

Test Clips to Test Probes
2 wires: 1 red, 1 black 36” long, 2.25” hook clips on one end test probes on the other
wt. 0.1
23Z071 $2.49

Qty:

Meter Probe Set
1 red, 1 black 40” long meter ends have small diameter 1/16” diameter probes
popular with the old Triplett VOM’s and inexpensive imports
 wt. .1
23Z072 $2.49

Qty:

LAB CARTS
(Scopes not included) 
For a list of scopes available, check out our Test Equipment pages

FLUKE TC100
Scope Cart
Three shelves and push handle
TC100 $150.00 each