12VDC Fans

12VDC Fans and Blowers

Click here for AC Fans

Sanyo 40mm 12VDC Fan
Sanyo Denki "DC Fine Ace 15" miniature 12 Volt dc (130mA) 40 x 40 x 15 mm fans. The Sanyo part number is 109P0412H702.
25F030 Unit Price : 3.95

Nidec 12 v 80mm Fan
Nidec Beta V fan pulls p/n TA300DC. 12VDC, 0.15 Amp, 80 x 80 x 25 mm.
25F029 Unit Price : $2.95

Nidec 12 Volt 60mm Fan
Nidec Beta V fan p/n TA225DC aka model M33455-16.
Measures 60mm square by 25mm deep, operates off 12 Volts dc at 0.22 Amp..
25F028 Unit Price : $3.95

Elina 12V 60mm Fan
Elinafan model HDF6025L-12LB 12VDC @ 5.5mA. This fan is 60mm square by 25mm deep; five bladed for quiet operation.
25F021 Unit Price : $4.95

NMB Micro Boxer 12-Volt 60mm Fan
NMB Micro Boxer 12 Volt DC 0.11 Amp fan, it measures 60 x 60 x 20 mm. The NMB model is 2408NL-04W-B30. Seven blades.
25F023 Unit Price : $4.95

12VDC 90mm (3&5/8") fan
These fans are pulls , they are all the same size (3 and 5/8 inches square), and run on the same Voltage (12 Volts dc), they are represented by mfrs such as Boxer #3610PL, NMB # 3610NL, Elina MDA 120925HB, Papst #3312 and others of similar design.
25F003 Unit Price : $4.95

Miniature 12VDC Fan 60mm
New fans from Mechatronics, their part number F6025E12B1.
This is a 60 x 60 x 25 mm, 12Vdc brushless ball bearing fan.
Seven blades for quiet operation, unless of course 50 volts is applied whereupon it will make lots of noise for a little while. DATA SHEET
04F005 $4.95

Sanyo Fan Assembly
Sanyo San Ace Fan (12VDC @ 0.06A) mounted on a plastic shroud measuring 4-1/4" x 2". This assembly can be easily mounted most anywhere. The little fan may be removed for custom applications. There are removed from our 23F003 assemblies. Large quantity available, inquire about discounts on lots of 100 or more.
23F004 $2.69

Heatsink - Fan Assembly
Originally made for a Pentium Slot 1 CPU, this 5" x 2" x 1" cooler can be adapted for a variety of uses. It should be especially useful in cooling applications with TEC's (Peltier Junctions/Thermoelectric Coolers). The Sanyo ACE 109X1612H2016 Fan operates on 12VDC @ 0.06A, the fan is 1/3/4" in diameter. The cooling area on the heatsink measures 1-7/8" x 3-7/8". See also part numbers 23F004 and 23Z038. Large quantity available, inquire about discounts on lots of 100 or more.
23F003 $2.95

98c003.jpg (6446 bytes) CLIP-ON COOLING FAN
For 75-233MHz Pentium. Topmotor model DC1205SM these are also good
for use with Peltier junctions or thermoelectric coolers, the heatsink
measures 50x50x10mm.
98C003 $4.95 each

97f009.jpg (5530 bytes) 12VDC FAN
Small size, only 1.5" square x 0.75" (40mm x 20mm).
Fonsan DFB0412M 12VDC, 80mA,

97F009 $4.95 each

94f001.jpg (1783 bytes) 12VDC BRUSHLESS FAN
3.125" square by 1" thick 80mm x 25mm).
NMB 3110NL-04W0B30 or equivalent
94F001 $4.99 each

Muffin MC12A3 12Volt 120mm fan
Muffin MC12A3 120x33 (or so) mm 5 bladed fan. Spec'd @ 12VDC, 0.66A
04F031 Unit Price : $6.95

Boxer 12V 4&3/4" Fan
Boxer 4710PL-04W-B29 12VDC @0.2A fan pulls. 120 x 25 mm ball bearing brushless 5 bladed provided by NMB (IMC) of Chatsworth.
04F034 Unit Price : $5.95

12VDC BRUSHLESS FAN
This is a Fonsan DFB0812H 7-bladed. 12VDC 0.18A new fan measuring 80x80x25mm
97F001 $4.95 each

Fonsan 12VDC 60mm Fan
Fonsan made these 60x60x20mm 12VDC @0.09A seven bladed brushless fans. They were assembled in China by Pandas.
The model number DFD0612L has been assigned to them. New.
04F016 Unit Price : $4.95

Adda 12VDC 80mm Fan
Adda DC brushless fan model AD0812HS-A70GL. This little puffer draws 0.25A @ 12VDC.Made in Taiwan by nearly everyone, it measures 3&1/8" square by 1" thick and boasts seven blades
04F017 Unit Price : 4.95

12Volt dc 4.75" Fan Bargains
Another motley collection of fans that are varied as to lineage and planet of origin. What these share in common is that all in this lot operate on 12 Volts DC and are 4&3/4 inches square. Some will be pulls, some will have power cords and/or fan guards installed. Enjoy.
04F025 Unit Price : $4.95

Tetra 12Volt 80mm Fan
Tetra Fan USA Inc is the maker of these little puffers.
They are 80x80x25mm which translates into about 3&1/8 square and one inch thick. With 12 Volts dc applied they draw 1/4 amp. Tetra's model number is TH082512Dh. Stripped and tinned leads have been thoughtfully provided on the attached wires.
04F028 Unit Price : $4.95

Boxer Fan 12 Volt 120 x 25mm
Mineba Co. is the provider of this NMB Boxer fan model 4710NL-04W-B29 The ball bearing device requires 0.2 Amps at 12Volts DC. 7 blades
04F029 Unit Price : $5.95